{
	"IPAD1": "Primary Center Address?Domain name or fixed IP also take effect.",
	"PORT1": "Primary Center Port?Data range:1~65535.",
	"IPAD2": "Backup Center Address?Domain name or fixed IP also take effect.",
	"PORT2": "Backup Center Port?Data range:1~65535.",
	"WorkMode": "Work Pattern?TCPTCP transmission mode;UDPUDP transmission mode.",
	"RetryInt": "Re-connected Task Interval(s)?Unit: second. Waiting for the time interval when the reconnection center. Values range(0 ~ 65535).",
	"ReConnCnt": "Reconnection Attempts?Connection is not center, the number of connection attempts reset center. The value cannot be set too large, otherwise it may result in device with center service disconnect after waiting for a long time to the center. Values range (0 ~ 255).",
	"RGSTPKT": "Custom Registration Packet?Specified by registration packet data.",
	"HTBPKT": "Custom Heartbeat Packets?Specified by heartbeat packets of data.",
	"HeartPackInt": "Heartbeat Packets times?Unit: second. When device didn't send information, device can according to the time interval to send the heart bag, the scope (30 ~ 65535).",
	"SerialBaud": "Serial Baud Rate?When in work, device serial baud rate is set as the same as rate of lower computer.",
    "SerialDataBit": "Serial Data Bits?When in work, device serial data bits is set as the same as rate of lower computer.",
    "SerialStopBit": "Serial Stop Bits?When in work, device serial stop bits is set as the same as rate of lower computer.",
    "SerialParity": "Serial Parity?When in work, device serial parity is set as the same as rate of lower computer.",
    "SerialFlowCntrl": "Serial Flow Control?When in work, device serial flow control is set as the same as rate of lower computer.",
	"Cache": "Offline Cache?During disconnection, whether the serial port data is cached, and the cached data will be sent after connecting to the center.",
	"DebugLevel": "Debug Level?0=Without debug information;1= debug information.",
	"NetworkMode": "Network Search Mode? AUTO = adaptive; 2G only = only search 2G network; 3G only = search only 3G network; 4G only = only search 4G network.",
	"APN": "Wireless APN?If is to use private APN is modified into corresponding APN access point, otherwise no need to modify.",
    "APNUserName": "APN User Name?If use dedicated APN is modified into the corresponding user name, or don't need to modify.",
    "APNPassWord": "APN Password?If use dedicated APN is modified into the corresponding password, otherwise don't need to modify.", 
	"Auth": "Authentication?NONE=None Auth; PAP=PAP Auth; CHAP=CHAP Auth; ATUO=ATUO",
	"DNS": "DNS Address?Resolve the domain name server, if set to empty assigned by the carrier.",
	"LANIP": "LAN IP?LAN IP.",
	"NETMASK": "NETMASK?NETMASK.",
	"DHCP": "DHCP?DHCP.",
	"DHCPADDR1": "DHCP start addr start?DHCP start addr.",
	"DHCPADDR2": "DHCP end addr?DHCP end addr.",
	"KALIVE": "KEEPALIVE ENABLE?KEEPALIVE ENABLE.",
	"KALIVEADDR1": "Detection address1?KEEPALIVE Detection address1.",
	"KALIVEADDR2": "Detection address2?KEEPALIVE Detection address2.",
	"KALIVEADDR3": "Detection address3?KEEPALIVE Detection address3.",
	"KALIVEINT": "Detection cycle?KEEPALIVE Detection cycle.",
	"KALIVETIME": "Timeout times?KEEPALIVE Timeout times.",
	"KALIVEREDIAL": "Redial times?KEEPALIVE Redial times.",
	"DIALMODE": "Dial mode?dial mode.",
	"ResetTimeInt": "Reboot time?Unit: minutes. device automatic restart time, to set the time automatically restart after the device. 0 means not to enable this feature. Values range (0 ~ 4320)",
	"ZCATLOG": "zcat log?Whether to enable zcat log.",
	"SVER": "VERSION?version number.",
	"SIMEI": "IMEI?IMEI.",
	"SVENDOR": "operator?operator.",
	"SCARD": "SIM card status?SIM card status",
	"SCSQ": "CSQ?CSQ.",
	"SNETWORKTYPE": "Current network type?Current network type.",
	"SWANIP": "WAN IP?WAN IP.",
	"SLANIP": "LAN IP?LAN IP.",
	"SDNS": "DNS?DNS.",
	"SDTU": "Center connection status?Center connection status."
}